1)wvstreams(To install wvdial)
2)wvdial
You can Download them by following commands in terminal
sudo apt-get install wvstreams
sudo apt-get install wvdial
Now you are ready to install tata photon
Step 1:-
Now open terminal and type
sudo wvdialconf /etc/wvdial.conf
Now you should see something like this:-
Step 2 :-
sudo gedit /etc/wvdial.conf
Delete all the lines in the file and add following lines:-
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog ModemPhone = #777
Username = internet
Password = internet
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
Set Volume = 0
FlowControl = Hardware (CRTSCTS)Modem = /dev/ttyUSB0
Dial Command = ATDT
Baud = 460800
Stupid Mode = 1
Step 3:-
In terminal type
sudo wvdial
You should see something like this
Open Browser and start browsing (uncheck work offline mode).
When i trioed to type this,
ReplyDelete---> sudo apt-get install wvstreams
it asked password and type the so and pressed enter, after that i typed
---> sudo apt-get install wvdial
and its aying like this
===> Package wvdial is not available, but is referred to another package. This means that the package is missing, has been obsoleted or is only available from another source.
E: package 'wvdial' has no installation candidate.
What does this means?
I had used ubuntu 10.04 [lucid], but a new user for ubuntu 12.04 [Precise Pangolin] (LTS)...
Please tell me how to connect tata photon whiz on this new LTS platform... please... and thanks in advance :-)
In Step :2
ReplyDeleteLine:
Modem Type = Analog ModemPhone = #777
There is a space between Modem and Phone.Thanks a lot Buddy for being Helper :)
http://unlocking-huawei.blogspot.in/2012/08/tata-docomo-photon-max-huawei-ec306.html
ReplyDelete